Pl_Editor_zh_CN - en to zh translation catalogue (153 entries)

note: type: Title =
en: Drawing Sheet Editor
zh: 图框编辑器

note: type: Plain text
en: _Reference manual_
zh: _参考手册_

note: type: Plain text
en: *Copyright*
zh: *版权*

note: type: Plain text
en: This document is Copyright (C) 2024 by its contributors as listed below.  You may distribute it and/or modify it under the terms of either the GNU General Public License (http://www.gnu.org/licenses/gpl.html), version 3 or later, or the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0/), version 3.0 or later.
zh: 本文档版权 (C) 2024 年，作者如下。 您可以根据 GNU 通用公共许可证 (http://www.gnu.org/licenses/gpl.html) 第 3 版或更高版本或知识共享署名许可证 (http://creativecommons.org/licenses/by/3.0/) 第 3.0 版或更高版本的条款分发和/或修改本文档。

note: type: Plain text
en: *Contributors*
zh: *贡献者*

note: type: Plain text
en: *Feedback*
zh: *反馈*

note: type: Plain text
en: The KiCad project welcomes feedback, bug reports, and suggestions related to the software or its documentation. For more information on how to submit feedback or report an issue, please see the instructions at https://www.kicad.org/help/report-an-issue/
zh: KiCad 项目欢迎与软件或其文档相关的反馈、错误报告和建议。有关如何提交反馈或报告问题的更多信息，请参阅 https://www.kicad.org/help/report-an-issue/ 上的说明

note: type: Title ==
en: Introduction to the KiCad Drawing Sheet Editor
zh: KiCad 图框编辑器简介

note: type: Plain text
en: The Drawing Sheet Editor is a tool to create custom drawing sheets for use in the KiCad Schematic and Board Editors. Drawing sheets can include custom title blocks, frames, logos, as well as other text and graphics.
zh: 图框编辑器是一种工具，用于创建自定义绘图表，以便在 KiCad 原理图和电路板编辑器中使用。工程图表可以包含自定义标题栏、框架、LOGO 以及其他文本和图形。

note: type: Plain text
en: The frame, title block, and other graphic items (logos) are collectively called a *drawing sheet*.
zh: 框架、标题块和其他图形项目（LOGO）统称为 *图框*。

note: type: Plain text
en: Basic drawing sheet items are:
zh: 基本图框项目有：

note: type: Plain text
en: *Lines*
zh: *线条*

note: type: Plain text
en: *Rectangles*
zh: *矩形*

note: type: Plain text
en: *Text* (with keywords that will be replaced by the actual text, like the date, page number...) in the Schematic or Board Editors.
zh: 原理图或 PCB 编辑器中的 *文本*（包含将被实际文本替换的关键字，如日期、页码......）。

note: type: Plain text
en: *Poly-polygons* (mainly to place logos and special graphic shapes)
zh: *多边形*（主要用于放置 LOGO 和特殊图形）

note: type: Plain text
en: *Bitmaps*.
zh: *位图* 。

note: type: Plain text
en: Bitmaps can be plotted only by few plotters (PDF and PS only) Therefore, for other plotters, only a bounding box will be plotted.
zh: 位图只能由少量绘图仪绘制（仅限 PDF 和 PS）因此，对于其他绘图仪，仅绘制边界框。

note: type: Plain text
en: Items can be repeated, and text and poly_polygons can be rotated.
zh: 项目可以重复，文本和多边形可以旋转。

note: type: Title ==
en: Drawing Sheet Editor files
zh: 图框编辑器文件

note: type: Plain text
en: The Drawing Sheet Editor reads and writes KiCad drawing sheet files (`.kicad_wks`). These files can be used as custom drawing sheets for schematic and PCB designs by selecting a custom drawing sheet in the **Page Setup** dialog in each editor.
zh: 图框编辑器可读写 KiCad 图框文件（`.kicad_wks`）。通过在各编辑器的 **页面设置** 对话框中选择自定义图框，这些文件可用作原理图和 PCB 设计的自定义图框。

note: type: Plain text
en: When the Drawing Sheet Editor is first opened, it displays the default KiCad drawing sheet is used until a different drawing sheet file is opened.
zh: 首次打开图框编辑器时，会显示默认的 KiCad 图框，直到打开不同的图框文件。

note: type: Title ==
en: Theory of operations
zh: 操作理论

note: type: Title ===
en: Basic drawing sheet item properties
zh: 基本图框项目属性

note: type: Plain text
en: *Text* (with keywords, with will be replaced by the actual text, like the date, page number...) in the Schematic or PCB Editors.
zh: 原理图或 PCB 编辑器中的 *文本*（包含将被实际文本替换的关键字，如日期、页码......）。

note: type: Plain text
en: *Poly-polygons* (mainly to place logos and special graphic shapes).  These poly polygons are created by the **Image Converter** tool, and cannot be built inside the Drawing Sheet Editor, because it is not possible to create such shapes by hand.
zh: *多边形*（主要用于放置 LOGO 和特殊图形）。 这些多边形由 **图像转换器** 工具创建，无法在图框编辑器内建立，因为无法手动创建此类形状。

note: type: Plain text
en: *Bitmaps* to place logos.
zh: *位图* 放置 LOGO。

note: type: Plain text
en: Bitmaps can be plotted only by few plotters: PDF and PS only.
zh: 位图只能由少量绘图仪绘制：仅限 PDF 和 PS。

note: type: Plain text
en: Therefore:
zh: 因此：

note: type: Plain text
en: *Text, poly-polygons* and *bitmaps* are defined by a position, and can be rotated.
zh: *文本、多边形* 和 *位图* 由位置定义，可以旋转。

note: type: Plain text
en: *Lines* (in fact segments) and *rectangles* are defined by two points: a start point and a end point. They cannot be rotated (this is useless for segments).
zh: *线条*（实际上是线段）和 *矩形* 由两个点定义：起点和终点。它们不能旋转（这对线段毫无用处）。

note: type: Plain text
en: These basic items can be repeated.
zh: 这些基本项目可以重复。

note: type: Plain text
en: Repeated text also accepts an increment value for labels (has meaning only if the text is one letter or one digit).
zh: 重复文本还接受标签的增量值（只有当文本是一个字母或一个数字时才有意义）。

note: type: Title ===
en: Coordinates definition
zh: 坐标定义

note: type: Plain text
en: Each position, start point and end point of items is always relative to a page corner. This feature allows you to define a drawing sheet which is not dependent on the paper size.
zh: 项目的每个位置、起点和终点总是与页面角相对应。通过这一功能，您可以定义一个不依赖于纸张大小的图框。

note: type: Title ===
en: Reference corners and coordinates:
zh: 参考角和坐标：

note: type: Plain text
en: image:images/en/page_property_1.png[]
zh: image:images/zh/page_property_1.png[]

note: type: Plain text
en: When the page size is changed, the position of the item, relative to its reference corner does not change.
zh: 更改页面大小时，项目相对于其参考角的位置不会更改。

note: type: Plain text
en: Usually, title blocks are attached to the right bottom corner, and therefore this corner is the default corner, when creating an item.
zh: 通常，标题栏附加到右下角，因此在创建项目时，此角是默认角。

note: type: Plain text
en: For rectangles and segments, which have two defined points, each point has its reference corner.
zh: 对于具有两个定义点的矩形和线段，每个点都有其参考角。

note: type: Title ===
en: Rotation
zh: 旋转

note: type: Plain text
en: Items which have a position defined by just one point (text and poly-polygons) can be rotated:
zh: 仅由一个点定义位置的项目（文本和多边形）可以旋转：

note: type: Plain text
en: Normal: Rotation = 0
zh: 正常：旋转 = 0

note: type: Target for macro image
en: images/en/text_noriented.png
zh: images/zh/text_noriented.png

note: type: Plain text
en: Rotated: Rotation = 20 and 10 degrees.
zh: 旋转：旋转 = 20 和 10 度。

note: type: Target for macro image
en: images/en/text_rotated.png
zh: images/zh/text_rotated.png

note: type: Title ===
en: Repeat option
zh: 重复选项

note: type: Plain text
en: Items can be repeated:
zh: 项目可以重复：

note: type: Plain text
en: This is useful to create grid and grid labels.
zh: 这对于创建网格和网格标签很有用。

note: type: Target for macro image
en: images/en/page_property_2.png
zh: images/zh/page_property_2.png

note: type: Title ==
en: Text and keywords
zh: 文本和关键字

note: type: Title ===
en: Keywords
zh: 关键字

note: type: Plain text
en: Text can be simple strings or can include keywords.
zh: 文本可以是简单的字符串，也可以包含关键字。

note: type: Plain text
en: Keywords are replaced by actual values when the drawing sheet is used in a schematic or PCB design. They behave like xref:../eeschema/eeschema.adoc#text-variables[text variables] in the Schematic and Board Editors, except the values are either automatically set by the editor or set by the user in the Page Setup dialog of the respective editor.
zh: 在原理图或 PCB 设计中使用图框时，关键字会被实际值取代。它们的行为类似于原理图和电路板编辑器中的 xref:../eeschema/eeschema.adoc#text-variables[文本变量]，只是值由编辑器自动设置或由用户在相应编辑器的页面设置对话框中设置。

note: type: Plain text
en: The keyword syntax is `${KEYWORD}`. The keyword, including the surrounding `${}`, will be replaced by the keyword's value.
zh: 关键字的语法是 `${KEYWORD}`。关键字（包括周围的 `${}`）将被关键字的值替换。

note: type: Table
en: | Keyword name | Description
    | `KICAD_VERSION`
      | Version number of KiCad.
    | `#`
      | Sheet number.
    | `##`
      | Total number of sheets.
    | `COMMENT1` - `COMMENT9`
      | Contents of the `Comment<n>` field in Page Setup.
    | `COMPANY`
      | Contents of the `Company` field in Page Setup.
    | `FILENAME`
      | Filename of the schematic or PCB design file, with a file extension.
    | `ISSUE_DATE`
      | Contents of the `Issue Date` field in Page Setup.
    | `LAYER`
      | Name of the current PCB layer. This is blank in the Schematic and Board
        Editors. It is only shown in plots of PCB designs.
    | `PAPER`
      | Current sheet's paper size, which is set in Page Setup.
    | `REVISION`
      | Contents of the `Revision` field in Page Setup.
    | `SHEETNAME`
      | Sheet name of the current sheet. This is blank in the Board Editor.
    | `SHEETPATH`
      | Sheet path of the current sheet. This is blank in the Board Editor.
    | `TITLE`
      | Contents of the `Title` field in Page Setup.
zh: | 关键词名称 | 描述
    | `KICAD_VERSION`
      | KiCad 的版本号。
    | `#`
      | 当前图纸编号。
    | `##`
      | 总图纸数量。
    | `COMMENT1` - `COMMENT9`
      | 页面设置中 `Comment<n>` 字段的内容。这些字段可以用于添加图纸注释。
    | `COMPANY`
      | 页面设置中 `公司` 字段的内容。
    | `FILENAME`
      | 原理图或 PCB 设计文件的文件名，包括扩展名。
    | `ISSUE_DATE`
      | 页面设置中 `发布日期` 字段的内容。
    | `LAYER`
      | 当前 PCB 层的名称。在原理图编辑器和 PCB 编辑器中此值为空；仅在 PCB 设计打印预览中显示。
    | `PAPER`
      | 当前图纸的纸张大小，该大小在页面设置中定义。
    | `REVISION`
      | 页面设置中 `修订` 字段的内容。
    | `SHEETNAME`
      | 当前图纸的名称。在 PCB 编辑器中此值为空。
    | `SHEETPATH`
      | 当前图纸的路径。在 PCB 编辑器中此值为空。
    | `TITLE`
      | 页面设置中标题 `字段` 的内容。

note: type: Plain text
en: For example, `Size: ${PAPER}` displays "Size: A4" when the paper size is set to A4.
zh: 例如，当纸张尺寸设置为 A4 时，`Size: ${PAPER}` 显示 “Size: A4”。

note: type: Plain text
en: When the Preview display mode is active (image:images/icons/pagelayout_normal_view_mode_24.png[]), the title block is displayed like in the Schematic and PCB Editors, with keywords replaced with the corresponding values. You can configure the displayed values in the Page Preview Settings dialog (image:images/icons/sheetset_24.png[]).
zh: 预览显示模式激活时（image:images/icons/pagelayout_normal_view_mode_24.png[]），标题块的显示方式与原理图和 PCB 编辑器相同，关键字用相应的值代替。您可以在页面预览设置对话框（image:images/icons/sheetset_24.png[]）中配置显示的值。

note: type: Plain text
en: When the Edit mode is active (image:images/icons/pagelayout_special_view_mode_24.png[]), the title block is displayed without replacing keywords.
zh: 编辑模式激活时（image:images/icons/pagelayout_special_view_mode_24.png[]），标题块显示时不会替换关键字。

note: type: Title ===
en: Multi-line text
zh: 多行文字

note: type: Plain text
en: Text can be multi-line.
zh: 文本可以是多行文字。

note: type: Plain text
en: There are 2 ways to insert a new line in text:
zh: 在文本中插入新行有两种方法：

note: type: Plain text
en: Insert the `\n` 2 chars sequence (mainly in Page setup dialog in KiCad).
zh: 插入 `\n` 2 字符序列（主要在 KiCad 的页面设置对话框中）。

note: type: Plain text
en: Insert a new line in the Drawing Sheet Editor Design window.
zh: 在图框编辑器设计窗口中插入新线条。

note: type: Plain text
en: Here is an example:
zh: 这是一个例子：

note: type: Plain text
en: Setup
zh: 设置

note: type: Target for macro image
en: images/options_multi_line.png
zh: images/zh/options_multi_line.png

note: type: Plain text
en: Output
zh: 输出

note: type: Target for macro image
en: images/multi_line.png
zh: images/zh/multi_line.png

note: type: Title ===
en: Multi-line text in Page Setup dialog
zh: 页面设置对话框中的多行文本

note: type: Plain text
en: In the Page Setup dialog, text controls do not accept multi-line text.
zh: 在页面设置对话框中，文本控件不接受多行文本。

note: type: Plain text
en: The `\n` 2 character sequence should be inserted to force a new line inside a text object.
zh: 应插入 `\n` 2 字符序列，以强制在文本对象内换行。

note: type: Plain text
en: Here is a two line text object, in the Comment2 field:
zh: 下面是 `注释 2` 字段中的两行文本对象：

note: type: Plain text
en: image:images/insert_newline_code.png[]
zh: image:images/zh/insert_newline_code.png[]

note: type: Plain text
en: Here is the actual text:
zh: 这是实际的文字：

note: type: Plain text
en: image:images/multi_line_2.png[]
zh: image:images/zh/multi_line_2.png[]

note: type: Plain text
en: However, if you really want the `\n` inside the text, enter `\\n`.
zh: 但是，如果您真的想在文本中输入 `\n`，请输入 `\\n`。

note: type: Plain text
en: image:images/insert_slashnewline_code.png[]
zh: image:images/zh/insert_slashnewline_code.png[]

note: type: Plain text
en: And the displayed text:
zh: 并显示的文字：

note: type: Plain text
en: image:images/multi_line_3.png[]
zh: image:images/zh/multi_line_3.png[]

note: type: Title ==
en: Constraints
zh: 约束

note: type: Title ===
en: Page 1 constraint
zh: 第 1 页约束

note: type: Plain text
en: When using the Schematic Editor, the full schematic often uses more than one page.
zh: 在使用原理图编辑器时，完整的原理图往往会用到一页以上。

note: type: Plain text
en: Usually drawing sheet items are shown on all pages, but you can also set each item to be shown only on the first page or on all pages except the first page.  To change which pages an item is shown on, use the dropdown in the the item's **Item Properties** panel. Options are **show on all pages**, **first page only**, and **subsequent pages only**.
zh: 通常图框项目会显示在所有页面上，但您也可以设置每个项目只显示在第一页或除第一页外的所有页面上。 要更改项目在哪些页面上显示，请使用项目 **项目属性** 面板中的下拉菜单。选项包括 **在所有页面显示**、**仅在第一页显示** 和 **仅在后续页面显示**。

note: type: Title ===
en: Text maximum size constraint
zh: 文本最大尺寸限制

note: type: Plain text
en: Text items have a maximum size constraint. You can set a **maximum height** and **maximum width**, which together form a bounding box defining the maximum size of the text object.
zh: 文本项目有最大尺寸限制。您可以设置 **最大高度** 和 **最大宽度**，它们共同组成一个边界框，定义文本对象的最大尺寸。

note: type: Plain text
en: If the text object is bigger than the maximum size in a given dimension, the text object will be dynamically compressed in that dimension in order to fit within the bounding box. This will result in the text being visually distorted.  If the text fits within the bounding box, the text will not be compressed.
zh: 如果文本对象在给定维度上大于最大尺寸，文本对象将在该维度上被动态压缩，以适应边界框。这将导致文本在视觉上失真。 如果文本在边界框内，则文本不会被压缩。

note: type: Plain text
en: When either parameter is set to `0`, KiCad will not enforce a maximum size in that dimension.
zh: 当任一参数设置为 `0` 时，KiCad 将不强制执行该尺寸的最大尺寸。

note: type: Plain text
en: Some text with the maximum height and width set to `0`:
zh: 最大高度和宽度设置为 `0` 的文本：

note: type: Plain text
en: The same text compressed because the maximum width is set smaller than the width of the text:
zh: 由于最大宽度设置小于文本宽度，因此压缩了相同的文本：

note: type: Title ==
en: Invoking the Drawing Sheet Editor
zh: 调用图框编辑器

note: type: Plain text
en: The Drawing Sheet Editor is typically invoked from a command line, or from the KiCad Project Manager.
zh: 图框编辑器通常通过命令行或 KiCad 工程管理器调用。

note: type: Plain text
en: From a command line, the syntax is pl_editor <*.kicad_wks file to open>.
zh: 从命令行，语法是 pl_editor <*.kicad_wks 文件打开>。

note: type: Title ==
en: Drawing Sheet Editor Commands
zh: 图框编辑器命令

note: type: Title ===
en: Main Screen
zh: 主屏幕

note: type: Plain text
en: The image below shows the main window of the Drawing Sheet Editor.
zh: 下图显示了图框编辑器的主窗口。

note: type: Target for macro image
en: images/main_window.png
zh: images/zh/main_window.png

note: type: Plain text
en: The main part of the screen is the editing canvas for the open drawing sheet.
zh: 屏幕的主要部分是打开的图框的编辑画布。

note: type: Plain text
en: The right pane is a properties editor for editing the selected item. It only appears when an item is selected in the canvas.
zh: 右侧窗格是一个属性编辑器，用于编辑选定的项目。只有在画布中选中项目时才会出现。

note: type: Title ===
en: Main Window Toolbar
zh: 主窗口工具栏

note: type: Plain text
en: The top toolbar allows for easy access to the following commands:
zh: 顶部工具栏可以轻松访问以下命令：

note: type: Table
en: |image:images/icons/new_generic_24.png[]
    |Create a new drawing sheet.
    
    |image:images/icons/directory_open_24.png[]
    |Load a drawing sheet file.
    
    |image:images/icons/save_24.png[]
    |Save the current drawing sheet in a `.kicad_wks` file.
    
    |image:images/icons/sheetset_24.png[]
    |Display the page size selector and the title block user data editor.
    
    |image:images/icons/print_button_24.png[]
    |Prints the current page.
    
    |image:images/icons/undo_24.png[] image:images/icons/redo_24.png[]
    |Undo/redo tools.
    
    |image:images/icons/zoom_in_24.png[] image:images/icons/zoom_out_24.png[]
     image:images/icons/refresh_24.png[] image:images/icons/zoom_fit_in_page_24.png[] 
    |Zoom in, out, redraw and auto, respectively.
    
    |image:images/icons/pagelayout_normal_view_mode_24.png[]
    |Show the drawing sheet in Preview mode: text is shown like in the Schematic or
    PCB Editors, with text keywords replaced by user text.
    
    |image:images/icons/pagelayout_special_view_mode_24.png[]
    |Show the drawing sheet in Edit mode: text is displayed "as is", without any
    keyword replacement.
    
    |image:images/en/set_base_corner.png[width="70%"]
    |Reference corner selection, for coordinates displayed to the status bar.
    
    |image:images/en/set_current_page.png[width="85%"]
    |Selection of the page number (page & or other pages).
    
    This selection has meaning only if some items than have a page option,
    are not shown on all pages (in a schematic for instance, which contains
    more than one page).
zh: |image:images/icons/new_generic_24.png[]
    | 创建一个新的图框。
    
    |image:images/icons/directory_open_24.png[]
    |加载一个已保存的图框文件。
    
    |image:images/icons/save_24.png[]
    |将当前图框保存为 `.kicad_wks` 文件。
    
    |image:images/icons/sheetset_24.png[]
    |显示页面大小选择器及标题栏用户数据编辑器。
    
    |image:images/icons/print_button_24.png[]
    | 打印当前页面。
    
    |image:images/icons/undo_24.png[] image:images/icons/redo_24.png[]
    |撤销/重做工具。
    
    |image:images/icons/zoom_in_24.png[] image:images/icons/zoom_out_24.png[]
     image:images/icons/refresh_24.png[] image:images/icons/zoom_fit_in_page_24.png[] 
    |分别实现放大、缩小、重新绘制和自动适配页面的缩放功能。
    
    |image:images/icons/pagelayout_normal_view_mode_24.png[]
    |在预览模式下显示图框：文本展示方式与原理图或 PCB 编辑器相同，其中关键词会被用户自定义文本替代。
    |image:images/icons/pagelayout_special_view_mode_24.png[]
    |在编辑模式下显示图框文本 “原样” 展示，不进行任何关键词替换。
    |image:images/en/set_base_corner.png[width="70%"]
    |选择参考角，用于状态栏中显示的坐标系统。
    |image:images/en/set_current_page.png[width="85%"]
    |选择页码（当前页或其它页）。
     此选项仅当存在某些具有页码选项的项目，并且这些项目不会出现在所有页面上时才有意义（例如，对于包含多页的原理图）。通过选择特定页码，可以确保相关联的元素只在指定的页面上显示，而不会重复出现在每个页面上，从而保持图纸的清晰性和组织性。

note: type: Title ===
en: Commands in drawing area (draw panel)
zh: 绘图区域中的命令（绘图面板）

note: type: Title ====
en: Keyboard Commands
zh: 键盘命令

note: type: Table
en: |F1 |Zoom In
    |F2 |Zoom Out
    |F3 |Refresh Display
    |F4 |Move cursor to center of display window
    |Home |Fit footprint into display window
    |Space Bar |Set relative coordinates to the current cursor position
    |Right Arrow |Move cursor right one grid position
    |Left Arrow |Move cursor left one grid position
    |Up Arrow |Move cursor up one grid position
    |Down Arrow |Move cursor down one grid position
zh: | F1 | 放大
    | F2 | 缩小
    | F3 | 刷新显示
    | F4 | 将光标移动到显示窗口的中心
    | Home | 将封装放入显示窗口
    | 空格键 | 设置当前光标位置的相对坐标
    | 右箭头 | 将光标向右移动一个网格位置
    | 向左箭头 | 将光标向左移动一个网格位置
    | 向上箭头 | 将光标向上移动一个网格位置
    | 向下箭头 | 将光标向下移动一个网格位置

note: type: Title ====
en: Mouse Commands
zh: 鼠标命令

note: type: Table
en: |Scroll Wheel |Zoom in and out at the current cursor position
    |Ctrl + Scroll Wheel |Pan right and left
    |Shift + Scroll Wheel |Pan up and down
    |Right Button Click |Open context menu
zh: | 滚轮 | 在当前光标位置放大和缩小
    | Ctrl +滚轮 | 左右平移
    | Shift +滚轮 | 上下平移
    | 右键单击 | 打开上下文菜单

note: type: Title ====
en: Context Menu
zh: 上下文菜单

note: type: Plain text
en: Displayed by right-clicking the mouse:
zh: 通过右键单击鼠标显示：

note: type: Plain text
en: Add Line
zh: 添加线

note: type: Plain text
en: Add Rectangle
zh: 添加矩形

note: type: Plain text
en: Add Text
zh: 添加文字

note: type: Plain text
en: Add Bitmap
zh: 添加位图

note: type: Plain text
en: Zoom selection: direct selection of the display zoom.
zh: 缩放选择：直接选择显示缩放。

note: type: Plain text
en: Grid selection: direct selection of the grid.
zh: 网格选择：直接选择网格。

note: type: Title ===
en: Status Bar Information
zh: 状态栏信息

note: type: Plain text
en: The status bar is located at the bottom of the Drawing Sheet Editor and provides useful information to the user.
zh: 状态栏位于图框的底部，为用户提供有用的信息。

note: type: Target for macro image
en: images/en/pl_status_bar.png
zh: images/zh/pl_status_bar.png

note: type: Plain text
en: Coordinates are always relative to the corner selected as the reference corner in the reference corner dropdown in the menubar.
zh: 坐标始终相对于菜单栏中的参考角下拉列表中选为参考角的角。

note: type: Title ==
en: Properties editor
zh: 属性编辑器

note: type: Plain text
en: The right pane is a properties editor. It only appears when an item is selected in the canvas. The **Item Properties** tab contains properties for the selected item. These properties depend on what type of item is selected. The **General Options** tab lets you edit default properties and margins for the *sheet.
zh: 右侧窗格是属性编辑器。仅当在画布中选择项目时，它才会显示。**项目属性** 选项卡包含所选项目的属性。这些属性取决于所选的项目类型。通过 **常规选项** 选项卡，您可以编辑 *sheet 的默认属性和边距。

note: type: Plain text
en: Changes made in the properties editor are not applied until you click the **Apply** button.
zh: 在属性编辑器中所做的更改在单击 **应用** 按钮之前不会应用。

note: type: Title ==
en: Design Inspector window
zh: 设计检查器窗口

note: type: Plain text
en: The Design Inspector shows a table of every item in the drawing sheet and their properties. Selecting an item in the Design Inspector also selects the item on the canvas and leaves it selected when you close the Design Inspector.
zh: 设计检查器显示工图框中每个项目及其属性的表格。在设计检查器中选择项目也会在画布上选择该项目，并在您关闭设计检查器时保持选中状态。

note: type: Plain text
en: To open the Design Inspector, use **Inspect** -> **Show Design Inspector**.
zh: 要打开设计检查器，请使用 **检查** -> **显示设计检查器** 。

note: type: Title ==
en: Interactive editing
zh: 交互式编辑

note: type: Title ===
en: Item selection
zh: 项目选择

note: type: Plain text
en: An item can be selected:
zh: 可以选择一个项目：

note: type: Plain text
en: From the Design Inspector
zh: 来自设计检查器

note: type: Plain text
en: By Left clicking on it.
zh: 通过左键单击它。

note: type: Plain text
en: By Right clicking on it (and a pop up menu will be displayed).
zh: 通过右键单击它（将显示一个弹出菜单）。

note: type: Plain text
en: When selected, this item is drawn in a lighter shade of color and the properties editor will be displayed for the selected item.
zh: 选中此选项后，将以较浅的颜色阴影绘制此项，并且将显示所选项的属性编辑器。

note: type: Plain text
en: When right clicking on the item, a pop-up menu is displayed. The pop menu contents depend on the type of object selected.
zh: 右键单击该项目时，将显示一个弹出菜单。弹出菜单内容取决于所选对象的类型。

note: type: Title ===
en: Item creation
zh: 项目创建

note: type: Plain text
en: To add a new item, use the appropriate button in the right toolbar and then click on the canvas. The item will be added to the canvas and selected, and the properties editor for the new item will open. You can edit the item's properties in the properties editor, then click **Apply** to modify the new item.
zh: 要添加新项目，请使用右侧工具栏中的相应按钮，然后单击画布。该项目将被添加到画布中并处于选中状态，并且将打开新项目的属性编辑器。您可以在属性编辑器中编辑项目的属性，然后单击 **应用** 以修改新项目。

note: type: Plain text
en: The available items are lines (image:images/icons/add_graphical_segments_24.png[]), rectangles (image:images/icons/add_rectangle_24.png[]), text (image:images/icons/text_24.png[]), and bitmaps (image:images/icons/image_24.png[]).
zh: 可用项目包括线条 (image:images/icons/add_graphical_segments_24.png[])、矩形 (image:images/icons/add_rectangle_24.png[])、文本(image:images/icons/text_24.png[]) 和位图 (image:images/icons/image_24.png[])。

note: type: Plain text
en: You can also add new items from the right-click context menu.
zh: 您还可以从右键单击上下文菜单添加新项目。

note: type: Plain text
en: Logos must first be created by the Image Converter tool, which creates a page layout description file. You can use the **Append Existing Drawing Sheet** command to insert the logo (a poly polygon) contained in the new drawing sheet.
zh: LOGO 必须首先由位图转换器工具创建，该工具会创建页面布局描述文件。您可以使用 **追加现有图框** 命令插入新绘图表中包含的 LOGO（多边形）。

note: type: Title ===
en: Adding lines, rectangles and text
zh: 添加线条、矩形和文本

note: type: Plain text
en: When you add lines, rectangles, or text, the item will be added to the canvas, selected, and shown in the properties editor. You can edit the item's properties in the properties editor, then click **Apply** to apply the changes.
zh: 添加线条、矩形或文本时，项目将被添加到画布中，处于选中状态，并在属性编辑器中显示。您可以在属性编辑器中编辑项目的属性，然后单击 **应用** 以应用更改。

note: type: Plain text
en: You can also move the item in the canvas after it has been placed by dragging it or using the Move command (kbd:[M]). Lines and rectangles can be moved as a shape, but you can also move their points individually.
zh: 在放置项目后，您还可以通过拖动项目或使用移动命令 (kbd:[M]) 在画布中移动项目。 线条和矩形可以作为形状移动，但您也可以单独移动它们的点。

note: type: Plain text
en: Lines and rectangles typically use the same corner reference for both the start and end points. If this is not the case, the item's geometry will change when the sheet size or margins are changed.
zh: 直线和矩形通常对起点和终点使用相同的角参照。如果不是这种情况，则当更改图纸大小或边距时，项目的几何图形将发生变化。

note: type: Title ===
en: Adding logos
zh: 添加 LOGO

note: type: Plain text
en: To add a logo, a poly polygon (the vectored image of the logo) must be first created using the Image Converter tool, which is available in the main KiCad Project Manager window. Polygons cannot be created by hand.
zh: 要添加 LOGO，必须首先使用位图转换器工具创建多边形（ LOGO 的矢量图像），该工具可在 KiCad 工程管理器主窗口中使用。多边形不能手动创建。

note: type: Plain text
en: The Image Converter tool creates a drawing sheet file which contains only one item: a poly polygon representing the source image. This drawing sheet file is appended to the current design, using the **Append Existing Drawing Sheet** command.
zh: 位图转换器工具将创建一个图框文件，该文件仅包含一项：表示源图像的多边形多边形。此图框文件将使用 **追加现有图框** 命令追加到当前设计中。

note: type: Plain text
en: This command can be used to append any drawing sheet file, regardless of
          what items it contains. All items in the appended file will be added to
          the current design.
zh: 此命令可用于追加任何图形图纸文件，而不管它包含哪些项目。附加文件中的所有项目都将添加到当前设计中。

note: type: Plain text
en: Once a poly polygon is inserted, it can be moved and its parameters edited.
zh: 插入多边形后，可以移动它并编辑其参数。

note: type: Title ===
en: Adding image bitmaps
zh: 添加图像位图

note: type: Plain text
en: You can add an image bitmap using many common bitmap formats (PNG, JPEG, BMP, etc.).
zh: 您可以使用许多常见的位图格式（PNG、JPEG、BMP 等）添加图像位图。

note: type: Plain text
en: When a bitmap is imported, its PPI (pixel per inch) definition is set to 300PPI.
zh: 导入位图时，其 PPI（每英寸像素数）定义设置为 300PPI。

note: type: Plain text
en: This value can be modified in the properties editor.
zh: 可以在属性编辑器中修改此值。

note: type: Plain text
en: The actual size of the bitmap in the drawing sheet depends on this parameter.
zh: 图框中位图的实际大小取决于此参数。

note: type: Plain text
en: Be aware that using higher definition values brings larger output files, and can have an effect on draw or plot time.
zh: 请注意，使用更高的清晰度值会带来更大的输出文件，并且可能会影响绘制或绘图时间。

note: type: Plain text
en: Bitmaps can be repeated but not rotated.
zh: 位图可以重复，但不能旋转。
